Check out our new Facebook page!

Direct Link: http://www.facebook.com/#!/pages/Hallmarque-PAT/342676659078947

It is the responsibility of your landlord / Site Manager to ensure that electrical items are safe to use. Because of this,  it is becoming increasingly common for landlords to need proof that all electrical items are safe prior to their use in the building that they maintain.

For insurance purposes it is highly likely that they may have already tested permanent electrical fixtures within the the accommodation however you may be required to do the same for your own appliances too.

Hallmarque PAT are a friendly family business who offer competent and efficient electrical testing at competitive rates.

To discuss your requirements and receive a free quote please contact us using any of the methods below.

Telephone: 01673 860655

E-mail: enquiries@hallmarquepat.co.uk.

For your free PAT testing quote please contact us using any of the following methods.

Telephone: 01673 860655
Mobile: 0777 351 3371

E-mail: enquiries@hallmarquepat.co.uk

We look forward to hearing from you!

Write to us:

Hallmarque PAT
1 Phillips Court
Welton
Lincoln
Lincolnshire
LN2 3LB

Telephone: 01673 860655
Mobile: 0777 351 3371

E-mail: enquiries@hallmarquepat.co.uk

We look forward to hearing from you!

A successfully completed electrical apprenticeship, with some post apprenticeship experience is a good way of demonstrating competence for general electrical work. More specialised work such as maintenance of high voltage switchgear or control system modification is almost certainly likely to require additional training and experience.

[Source: HSE]

• Switch off and unplug the equipment before you start any checks.
• Check that the plug is correctly wired (but only if you are competent to do so).
• Ensure the fuse is correctly rated by checking the equipment rating plate or instruction book.
• Check that the plug is not damaged and that the cable is properly secured with no internal wires visible.
• Check the electrical cable is not damaged and has not been repaired with insulating tape or an unsuitable connector. Damaged cable should be replaced with a new cable by a competent person.
• Check that the outer cover of the equipment is not damaged in a way that will give rise to electrical or mechanical hazards.
• Check for burn marks or staining that suggests the equipment is overheating.
• Position any trailing wires so that they are not a trip hazard and are less likely to get damaged.

If you are concerned about the safety of the equipment you should stop it from being used and ask a competent person to undertake a more thorough check.

[Source: HSE]

Checks should be carried out often enough that there is little chance the equipment will become unsafe before the next check. It is good practice to make a decision on how often each piece of equipment should be checked, write down the decision, make sure the check is carried out, and write down the results. You should change how often you carry out checks according to the number and severity of faults found.

The best way to find out if specialised equipment is safe, is to have it inspected and tested by a person with specific competence on the type of equipment. This may be the original manufacturer or his authorised service and repair agent. A reputable servicing company that deals with the type of equipment should also be competent to check its safety.

[Source: HSE]

Over the years, Dale has been involved in many bands and has unfortunately witnessed how injuries can occur when using electrical appliances within the music industry. Due to these events, Dale is keen to stress the importance of safety to groups who perform in pubs and clubs and recommends regular testing of their equipment. Items include, but are not limited to amps, lights, sound systems and equalizers.

Dale believes in keeping music live and in particular helping to make sure musicians and the general public are kept safe. His unparalleled drive and enthusiasm to achieve this is demonstrated by a discounted rate for musical groups and others connected to the music industry including stage lighting.

Please do not hesitate to contact us today for your tailored quote.

Telephone: 01673 860655
Mobile: 0777 351 3371

E-mail: enquiries@hallmarquepat.co.uk

Government statistics show 20% of fires in UK homes is due to electrical faults and in 2008 resulted in 27 deaths and 1000 injuries. Under UK law a landlord, without a regular pat test of appliances, could be found to have failed to take reasonable steps to ensure the safety of their tenants. This could lead to the landlord been liable to imprisonment, fines or even their property insurance been invalid.

It is vital a landlord understands their legal obligations when it come to potable appliances and testing in their rented properties. The landlord must make sure that any appliances provided as part of the tenancy agreement are safe.

[Source: landlordexpert.co.uk]

According to government statistics released last month almost a fifth of all fires in UK homes are caused by electrical faults. In 2008 this resulted in 27 deaths and over 1000 injuries. In addition to the risk of house fires almost 14,000 people are injured each year by electrical appliances according to the latest government estimates.

As the number of portable electrical appliances in furnished rented properties continues to increase, from cookers, to TV’s, to stereos and games consoles, portable appliance testing (PAT) is becoming an increasingly important part of a landlords responsibility to ensure their properties are safe and fit for purpose.

Under UK law without regular PAT tests a landlord could be found to have failed to take reasonable steps to ensure the safety of their tenants, and leave themselves liable to fines, imprisonment and invalidation of their property insurance.

[Source: residentiallandlord.co.uk]